Lighting design as an important part of the overall design of the decoration, often listen to the views of the decoration workers, some irresponsible and do not know the light of the decoration of the full house are equipped with all kinds of lamps, although the full house is obviously luxurious Style, but not only spent more money but also may choose the wrong lamp, inadvertently creating new pollution. Designers believe that in lighting design, to measure a good area and lighting intensity of lighting, but also need to focus on energy saving and environmental protection, Do not choose the wrong lamp and hurt the family.
NVC Lighting Op Photo Simon Lighting
Lights in the house should be as soft as possible to avoid extremes of light or darkness. Do not blindly pursue the brightness of indoor lighting, it should be 6 watts per square meter as a standard, and avoid using too dazzling decorative materials and lamps. The lower ceiling of the room should avoid the use of low hanging lamps. The lamps close to the horizontal line of sight should not be exposed as much as possible. Otherwise, they will easily cause glare and damage eyesight.
Under the premise of ensuring proper indoor illumination, try to avoid using decorative materials with large reflection coefficients. It is best not to brush the wall of the room too white or too blue. You can use a soft cool color system, such as using beige, light yellow, light blue instead of traditional white, to reduce the reflection glare in the room.
The green light is better for the eyes, excessive use of red, yellow and other monochromatic lights will damage the eyesight. In the selection of lights should go to the regular shopping mall to buy, unqualified lamps, not only luminous efficiency, long-term use will make the eyes afraid of light tears, congestion and swelling, and even lead to decreased vision.
When installing a lamp, if you install a sub-control switch, you can not only save a lot of trouble, but also adjust the light and dark according to the changes in the outdoor light, energy saving and environmental protection.
Tips: There are tricks to lighting
Increase the sense of security of the lights: the lights at the entrance of the room, can not see the interior of the room, easy to give people a sense of anxiety. Just put the lights in the room and add a sense of security immediately.
The depth of the room has also been expanded. If you look at the lighting method of women's stores, you will find that, besides the product window, the innermost wall is also very bright, which can create a comfortable environment for the customer.
Three-dimensional lighting: The purpose of using multiple lamps is to create a three-dimensional effect. The secret to achieving this effect is to make the room full of "bright → dimmed → bright" rhythm, specifically with "high, medium, low" position to place the lamps. Different luminaire designs create a sense of distance between light and light, giving the room a sense of depth.
The light that makes the room look spacious: If your room is small, you can use the light to change the narrow feeling of the room. Just turning the vertical surface, that is, the wall surface with lights, will make it more spacious. This method is more effective if it is used in the corner of a room and the junction of the ceiling and the wall. On the other hand, if you want to be quiet, just like the spotlight, you can only light up the floor.
Link: Environmental protection home improvement "eight taboos" Family health can guarantee
Lighting brand villa design room lighting decoration interior decoration decoration design window
PA plastic (nylon, Polyamide), English name: Polyamide,mainly have ESD PA SHEET,CONDUCTIVE PA SHEET,PA GF SHEET,FIREPROOF PA SHEET.PA66 plastic material is a translucent or opaque milky white crystalline polymer with plasticity.The main varieties in nylon are nylon 6 and nylon 66, nylon 6 for polycaprolactam, and nylon 66 for hexamethylene diamine, and nylon 66 is hard l2%.
Model USES:
PA66 USA's first no21 SPC highly rigid chemical resistance
PA66 United States first norr513h R533H Glass Fiber reinforced, high strength, special thermal stability, resistance to hydrolysis.
Through FDA and UL certification.
Through GM, Ford, Chryster, Delphi, Valeo and other automotive certifications, it is applicable to auto parts.
Mechanical parts, etc.
PA66 Germany basf A3X2G5 A3X2G7 glass fiber reinforced, red phosphorus flame retardant long-term stability, with excellent mechanical properties.
PA66 plastic raw material of Germany basf A3EG6 A3HG5 A3EG7 A3WG6 glass fiber reinforced with mechanical components that require high rigidity and dimensional stability.
PA66 Germany basf C3U high toughness without halogen and phosphorus flame retardant grade.
PA66 - basf A3K high fluidity for high stress engineering components such as bearings, gears and connectors.
PA66 American dupont 101F is a special grade for good heat resistance products.
PA66 plastic raw material American dupont 101L high strength injection molding improved machine feeding and stripping characteristics.
PA66 American dupont 408 hs injection molding grade good stability.
The PA66 American dupont 408L is suitable for high impact impact engineering products.
PA66 plastic material American dupont 42A color, high viscose silk, molecular weight distribution, can be welded to ultrasonic.
The PA66 American dupont 70G13L 70G13L glass fiber reinforced 13% high strength.
PA66 American dupont 70G33L 70G33L high strength glass fiber increased 33%.
PA66 plastic raw materials USA dupont 70G43L high strength 43% glass fiber reinforced.
The PA66 American dupont 80g33hs1-l ultra high impact fiberglass enhanced 33% super strength.
PA66 plastic raw material United States dupont FR15 FR50 FR60 glass fiber reinforced halogen-free flame retardant grade UL94 V-0
PA66 USA dupont ST801 super toughness excellent impact resistance.
Advantages:
1. High strength and stiffness;
2. High impact and notching impact strength;
3. High heat deflection temperature ;
4. Good at dempening;
5. Good glide and limp home characters;
6. Good chemical stability against organic solvents and fuels;
7. Resistant to thermal aging (applicable temperature between -40°C and 90°C;
8. Size alternation by humidity absorption must be considered;
Disadvantages:
1. The water absorption rate of nylon can be as high as 9%;
2. Physical stability is sensitive to temperature and humidity;
3. Dimensional stability is sensitive to temperature and humidity.
Application:
1. Nylon is widely substituted for wear parts of mechanical equipment, or used as quick-wear parts
of equipment instead of copper and alloy;
2. Shaft sleeve, bearing bush, lining, lining plate, gear;
3. Worm gear, roller copper guide rail, piston ring, seal ring, slide block;
4. Spheric bowl, impeller, blade, cam, nut, valve plate,
5. Pipe, stuffing box, rack, belt pulley, pump rotor, etc.
Combustion characteristics: Flame upper yellow, lower end blue, post-combustion plastic dribbling, blistering, special wool after fire, burning of nails and celery.
Specification: the thickness of PA/Nylons Plastic sheet material can be produced from 0.3mm to 1.9mm, the normal width is 600mm, the width cannot exceed 1200mm, the length is not limited.
The thickness of plate can be produced from 2mm to 180mm, the usual specification of 2-10mm is 1000mm* 2000mm, and the commonly used specification of 10-180mm is 600*1200 mm. PA/Nylons Plastic can also be customized according to requirements, and the width cannot exceed 1200mm, and the length is not limited.and The diameter of the PA/Nylons Plastic rod can be produced from 2mm to 250mm, the length is 1 meter, and it can be ordered to be more than 3 meters in length.
Color: Black ,white beige and blue, can also be made another color, and the color order is 500KG.
Modified varieties: can be added to the glass fiber, copper powder, and molybdenum disulfide enhancement plate according to customer's requirements.
Add antistatic agent to the permanent plate, the volume resistance value of 10 to the 6 to 9 power.
Add flame retardant to the flame retardant board from UL 94v-0 to HB combustion grade, and other modification requirements are required to customize various additional properties according to the actual use of the customer.
Product certification: most environmental certification reports and safety reports for raw materials, such as SGS report, CTI report, UL report, MSDS safety information, etc.
PA Plastic Sheet,Nylon Plastic Sheet,Conductive Plastic Sheet,Polyamide Nylon Sheet
Dongguan Noegem Plastic Products Co.,Ltd , http://www.noegempLastic.com