After getting the key from the developer, it is necessary to proceed with the renovation, but before the renovation, we must understand its steps, so that we can be aware of it, to mention the decoration steps and processes as the decoration of the white must be a look of hard work, Even from where to start the renovation do not know, in fact, this is also nothing, we can not be fully aware of any aspect of life, as long as more learning before the renovation is also possible, today Xiaobian for everyone to collect some of the decoration steps and Process related information, we learn together.
Decoration steps and processes
Before the renovation, it is necessary to conduct the first measure room, especially the rough room should pay attention to the accuracy of the data, because it determines the decoration costs and the future pattern at home.
When measuring rooms, not only should the height and width of walls and floors be measured. But also to count the wallpaper, the area of ​​the floor and the area of ​​furniture, the only way to reserve a good space.
Decoration Steps and Processes
The demolition of the rough house is relatively simple, as long as it is clear whether the wall is counted in the demolition project before the renovation, to avoid increasing the amount of time, after all, shoveling the wall is not cheap. In addition, after the demolition, it is necessary to allow door manufacturers to measure the size of the door, range hoods, stoves and other items need to be purchased in advance.
Decoration steps and processes 3, --- hydropower reform
In hydropower reform, not only slotting and wiring are reserved, but also attention should be paid to the transformation of strong and weak electricity, because strong electricity will directly affect the use of home appliances and lighting, while weak electricity will affect computers, mobile phones and other equipment. use. In addition, after the completion of the hydropower reform, it is necessary to do waterproofing. After the paint is dry, it must also be tested for closed water.
Decoration Steps and Procedures
When wrapping the tube, use a red brick to wrap the vertical tubes. This is both solid and affordable.
Decoration steps and processes 5, --- wall tiles, floor tiles
When tiling, first stick the wall tiles and put them on the floor tile to facilitate the entry and exit of the material on the spot. In addition, when sticking a wall tile, it is necessary to soak the water first, and to leave a fine slit, so as to avoid the thermal expansion and contraction of the tile and the warping and emptying.
Decoration Steps and Processes 6 - - Wall Decoration
In the wall decoration, carpenters and painters can perform at the same time. However, when painting, do not use too many layers to prevent the paint from cracking.
Decoration Steps and Process 7,---Sock Installation
When installing the socket, it is better to be more than good, especially in the kitchen, so as to prevent water vapor from entering the socket and causing a short circuit.
Decoration Steps and Processes 8 - - Flooring
When laying floors, level them first to prevent stepping noises. In addition, when installing the floor, some gaps should be reserved to avoid thermal expansion and contraction of the wood due to the impact of the climate, resulting in floor lift.
9. Steps and processes of renovation, first cleaning, furniture re-entry
After the above steps are completed, you must do the cleaning before the furniture can enter. After entering, clean it again. Then do an indoor pollution test and try to ventilate as many windows as possible to not only smell but also to evaporate harmful stains.
The article concludes: After reading so much about the decoration steps and processes, we also have a certain understanding of the nine steps and processes of the decoration. The next step is the specific implementation phase. In fact, the rough room decoration is very simple, as long as the article steps Step by step, you can create a well-behaved house.
Ultra Plantâ„¢ Grow Light offers One Chip Technology aimed to meet your indoor growing expectation such as improve plants' quality, increase yield, or better the margin, etc., all for helping you realize a higher return on your crops.
Ultra Plantâ„¢ Grow Light is combined our advanced All-In-One technology with patented optical design and customized light full spectrum supported from our experienced LED engineers, plant specialists and other partners working on horticulture.
From Ultra Plantâ„¢ APP, you are able to schedule the growing process including photoperiod, brightness and spectral in advance. The lighting system will help you grow smarter, easier and better.
Ultra Plantâ„¢ is the most versatile horticultural grow lighting fixture for indoor plants with flexible full spectrum, brightness control and uniform, wider light distribution, suitable for top lighting of all types of crops. No matter it applies to anywhere for any crop, Ultra Plantâ„¢ can do perfect work for you.
Grow Light On Flowering,Flowering Grow Lights,Red Light For Flowering,Led Grow Light For Veg And Flower
Feton Corporation , https://www.nbultraplantled.com